Kite Power Coop

open design in open sky

latest youtube presentation

About kite power coop

Kite Power Coop promotes Airborne Wind Energy (AWE) development.

We are open to community scrutiny and improvement.

AWE businesses cooperate in our members pages.You can help too.
Businesses using our designs adhere to Creative Commons cooperative standards.

The most recent Airborne Wind Energy discussions are on the Yahoo AWE Forum

Project Appeal Video

Browse our recent AWE videos on youtube

Project appeal for weathercocking, auto tacking, dual stroke system

 

 

Kite Power Coop news

Planning Stages

A cooperative group is proposing to develop Daisy style kites at large scales.

Recent AWES design schemes

Bottled Tornados  Valley topmesh mounted above

Weathercocking belay rail kifter kite mesh and rail clamp unit below

Collaborative research proposals

Cooperative members are intensifying current AWE testing by openly inviting Universities, OEM's, NGO's and Manufacturers to cooperate on a large set of research projects. Details of the project scopes are to be agreed, before collaborative submission for TSB H2020 funding.

 

Explanation video for flip flop drive

A new video is available describing the kite motor ground unit.

This crafty device takes a pulled web as power input and turns it into a spinning wheel.

The great bit is that the web can be pulled from either direction.

http://youtu.be/_TKF63CZFgo

Open Source Design Files

Collapse All
Expand All
Filename Size Date
How To Guide
front page copy 1.66 MB 2012-01-13 12:36:53
front page 10.27 MB 2012-01-13 12:43:41
generation system description 372.42 KB 2012-01-13 12:44:14
how to guide page 1 1.55 MB 2012-01-13 12:45:00
how to page 1 268.74 KB 2012-01-13 12:45:13
how to page 1 2.06 MB 2012-01-13 12:46:15
how to page 1 1.55 MB 2012-01-13 12:47:08
how to page 2 top net mount 218.25 KB 2012-01-13 12:47:27
how to page 2 top net mount 139.45 KB 2012-01-13 12:47:38
Thumbs 32.5 KB 2012-01-13 12:47:40
topnet system description 194.85 KB 2012-01-13 12:47:47
animation sets
spinning round on grass near town 442.86 KB 2013-07-27 05:41:31
Thumbs 6 KB 2013-07-27 05:41:32
spinning round on grass near town 948.79 KB 2013-07-27 05:41:47
circular hexmesh devices
circular grid attractions 24.51 KB 2013-06-11 07:14:28
circular grid attractions 63.52 KB 2013-06-11 07:14:30
circular hexgrid attractions 62.8 KB 2013-06-11 07:14:32
circular hexgrid attractions 24.51 KB 2013-06-11 07:14:32
circular hexgrid swelling circles 29.56 KB 2013-06-11 07:14:33
circular hexgrid Swelling 74.25 KB 2013-06-11 07:14:35
circular hexgrid Swelling 62.71 KB 2013-06-11 07:14:36
circular hexgrid swelling 23.03 KB 2013-06-11 07:14:37
circular hexgris swollen and meshed 77 KB 2013-06-11 07:14:39
circular hexgris swollen and meshed 39.49 KB 2013-06-11 07:14:40
circular hexmesh 71.04 KB 2013-06-11 07:14:42
circular hexmesh 67.6 KB 2013-06-11 07:14:43
circular hexmesh 25.06 KB 2013-06-11 07:14:44
circular hexmesh_autosave 11.02 KB 2013-06-11 07:14:45
hairnet by HoneyComb_Centroids[Digital Substance] 32.48 KB 2013-06-11 07:14:46
hairnet with cats by HoneyComb_Centroids[Digital Substance] 37.36 KB 2013-06-11 07:14:47
hairnet with wings and HoneyComb 51.28 KB 2013-06-11 07:14:54
Lifter hair net by honeycomb 34.46 MB 2013-06-11 07:41:07
hairnet with wings and HoneyComb 34.48 MB 2013-06-11 07:41:43
mothrapolis with vertical tethers.3dm 43 bytes 2013-06-11 07:41:50
mothrapolis1 100.02 KB 2013-06-11 07:42:07
mothrapolis1 40.61 KB 2013-06-11 07:42:12
skynet weathercocking 109.26 KB 2013-06-11 07:42:25
skynet weathercocking 36.8 KB 2013-06-11 07:42:30
Thumbs 52 KB 2013-06-11 07:42:41
Lifter hair net by honeycomb 34.47 MB 2013-06-11 07:55:53
mothrapolis with vertical tethers 109.03 KB 2013-06-21 15:47:51
attractors with mothrapolis with vertical tethers 467.02 KB 2013-06-21 15:48:02
attractors with mothrapolis with vertical tethers 52.6 KB 2013-06-21 15:48:04
mothrapolis with vertical tethers 33.2 KB 2013-06-21 15:48:06
cone under mothra
mothra lift essentials 1.28 MB 2013-05-17 08:03:57
mothra lift essentials 6.4 MB 2013-05-17 08:06:34
sky cone 4.36 MB 2013-05-17 08:07:38
tension drill with in out back front 4.16 MB 2013-05-17 08:09:11
tension drill with in out back front 3.6 MB 2013-05-17 08:10:31
tension drill with in out back front 51.89 KB 2013-05-17 08:10:34
tension drill 3.59 MB 2013-05-17 08:11:55
tension drill 111.89 KB 2013-05-17 08:11:58
tension drill 42.21 KB 2013-05-17 08:12:00
Thumbs 7.5 KB 2013-05-17 08:12:01
tension drill colouring 47.82 KB 2013-05-17 08:17:06
ice cream cone3 66.92 KB 2013-07-27 05:43:09
ice cream cone3 150.5 KB 2013-07-27 05:43:23
ice cream cone2 4.25 MB 2013-07-27 05:46:20
ice cream cone3 4.38 MB 2013-07-27 05:46:22
ice cream cone2 63.31 KB 2013-07-27 05:46:24
ice cream cone2 5.18 MB 2013-07-27 05:50:05
ice cream cone 5.18 MB 2013-07-27 05:50:59
ice cream cone 62.97 KB 2013-07-27 05:51:06
dynamo cone w hydrogen donut going for planes divisions 107.34 KB 2013-07-27 05:51:20
dynamo cone w hydrogen donut going for planes divisions 35.02 KB 2013-07-27 05:51:25
dynamo cone w hydrogen donut going for planes divisions 903.19 KB 2013-07-27 05:52:32
dynamo cone3 going for hydrogen lift_autosave 36.9 KB 2013-07-27 05:52:37
dynamo cone3 going for hydrogen lift 49.93 KB 2013-07-27 05:52:48
dynamo cone 3 going for hydrogen lift 139 KB 2013-07-27 05:52:55
dynamo cone 3 going for hydrogen lift 102.16 KB 2013-07-27 05:52:58
dynamo cone2 48.68 KB 2013-07-27 05:53:01
ice cream cone 5.15 MB 2013-07-27 05:53:05
dynamo cone2 3.33 MB 2013-07-27 05:55:30
dynamo cone 9.23 KB 2013-07-27 05:55:33
dynamo cone 28.44 KB 2013-07-27 05:55:37
dynamo cone2 3.26 MB 2013-07-27 05:55:41
cone of kites under mothra with centre 2.66 MB 2013-07-27 05:57:37
mothra 998.33 KB 2013-07-27 05:58:26
cone of kites under mothra 6.62 MB 2013-07-27 06:00:30
cone 15.14 MB 2013-07-27 06:11:47
cone 2.81 MB 2013-07-27 06:13:59
cone 8.3 MB 2013-07-27 06:20:07
cone 29.37 MB 2013-07-27 06:21:42
animation parts 3.39 MB 2013-07-27 06:22:16
cone of kites under mothra 3.39 MB 2013-07-27 06:24:48
cone of kites under mothra 6.44 MB 2013-07-27 06:25:53
design pics
aero evolved torus turner 161.53 KB 2012-01-13 12:22:45
all in one kite and hydrogen deep sea 1.03 MB 2012-01-13 12:23:23
combined stages to vertical 89.27 KB 2012-01-13 12:23:35
combined wind hydrogen and gravity generator 132.17 KB 2012-01-13 12:23:48
combined wind hydrogen and gravity generator 256.07 KB 2012-01-13 12:24:09
Comparisons 122.19 KB 2012-01-13 12:24:25
d-ring bag squash mount 204.71 KB 2012-01-13 12:24:45
duelling kites pump 157.47 KB 2012-01-13 12:25:05
free-n-fix-pump 406.1 KB 2012-01-13 12:25:37
freeandfixed1 339.69 KB 2012-01-13 12:26:06
freeandfixed2 371.52 KB 2012-01-13 12:26:40
freeandfixed3 268.04 KB 2012-01-13 12:26:55
freeandfixed4 572.61 KB 2012-01-13 12:27:13
freeandfixed5 711.38 KB 2012-01-13 12:27:36
generator chamber 140.63 KB 2012-01-13 12:27:48
hoop line twister 724 KB 2012-01-13 12:28:16
inner control winder2 596.08 KB 2012-01-13 12:28:51
kite tip comms and monitoring 428.03 KB 2012-01-13 12:29:03
mast-and-bow-generator 827.14 KB 2012-01-13 12:29:26
mast-and-bow-generator2 1.95 MB 2012-01-13 12:30:21
natural follower 4 139.25 KB 2012-01-13 12:30:31
natural follower kites to sides 190.54 KB 2012-01-13 12:30:44
parameters 580.84 KB 2012-01-13 12:31:13
research banner 39.25 KB 2012-01-13 12:31:16
sea wall generator 114.53 KB 2012-01-13 12:31:21
spring return generator 132.55 KB 2012-01-13 12:31:28
telemetry 70.96 KB 2012-01-13 12:31:34
tethered generator 272.03 KB 2012-01-13 12:31:47
Thumbs 136 KB 2012-01-13 12:31:57
untethered generation paths 250.42 KB 2012-01-13 12:32:12
vertical chamber generator 117.99 KB 2012-01-13 12:32:23
vid 49.97 KB 2012-01-13 12:32:33
vid1 53.58 KB 2012-01-13 12:32:43
vid10 86.32 KB 2012-01-13 12:32:57
vid2 48.06 KB 2012-01-13 12:33:09
vid3 44 KB 2012-01-13 12:33:22
vid4 66.59 KB 2012-01-13 12:33:36
vid5 56.75 KB 2012-01-13 12:33:57
vid6 52.86 KB 2012-01-13 12:34:01
vid7 34.65 KB 2012-01-13 12:34:05
vid8 36.63 KB 2012-01-13 12:34:10
vid9 38.42 KB 2012-01-13 12:34:15
wee shore generator 2.7 MB 2012-01-13 12:35:32
wee-shore-generator 127.06 KB 2012-01-13 12:35:44
sailing net 743.26 KB 2013-06-11 07:43:11
net of hexagons and circles 722.56 KB 2013-06-11 07:43:43
Untitled-1 289.74 KB 2013-06-11 07:44:01
hill saddle 535.46 KB 2013-06-11 07:44:26
daisy test field 112.2 KB 2013-06-11 07:44:39
arch kite sailing 293.35 KB 2013-06-11 07:45:00
sea surface rings 75.88 KB 2013-06-11 07:45:09
up n down submarine kite rings 335.24 KB 2013-06-11 07:45:26
line driver mothra circles and diamonds 24.44 KB 2013-07-27 06:27:44
ice cream cone2-2 733.47 KB 2013-07-27 06:28:22
ice cream cone2 1.24 MB 2013-07-27 06:28:29
steerable by hexmesh on loadpaths 675.77 KB 2013-07-27 06:28:45
sea gap 608.48 KB 2013-07-27 06:28:55
shrimp tail mothra 399.13 KB 2014-01-17 09:35:22
15-01-2014 11-49-34 179.06 KB 2014-01-17 09:35:22
spin basket 93.74 KB 2014-01-17 09:35:25
early
all in one kite and hydrogen deep sea 79.44 KB 2012-01-13 07:41:30
Braighe lines.3dm 713.93 KB 2012-01-13 07:44:01
cloth string and pulleys and some whipple trees 6.86 MB 2012-01-13 07:49:35
cloth string and pulleys and some whipple trees.3dm 103.05 KB 2012-01-13 07:49:58
combined wind hydrogen and gravity generator 69.1 KB 2012-01-13 07:50:21
Comparisons 173.4 KB 2012-01-13 07:50:50
Braighe lines 64.78 MB 2012-01-13 08:25:43
contra rotator stack.3dm 39 bytes 2012-01-13 08:25:44
d-ring bag squash mount 24.17 KB 2012-01-13 08:25:47
deployable layers 491.2 KB 2012-01-13 08:26:03
deployable scalable surfaces 1.35 MB 2012-01-13 08:26:42
disk driver 72.84 KB 2012-01-13 08:26:51
disk-driver2 1.41 MB 2012-01-13 08:28:02
disk-driverl 1.39 MB 2012-01-13 08:28:38
duelling kites pump 68.94 KB 2012-01-13 08:28:44
favicon 4.19 KB 2012-01-13 08:28:47
favicon 30.27 KB 2012-01-13 08:28:52
flute with feather sides 12.87 KB 2012-01-13 08:28:57
free and fixed rotation armatures 265.54 KB 2012-01-13 08:29:19
free and fixed rotation pumps 182.91 KB 2012-01-13 08:29:27
generator chamber 50.94 KB 2012-01-13 08:29:32
Giant flying windmill 1.33 MB 2012-01-13 08:30:15
hoop line twister 40.12 KB 2012-01-13 08:30:23
contra rotator stack 53.26 MB 2012-01-13 08:33:12
how roddys kites work.avi 11.97 MB 2012-01-13 08:39:52
inner control winder 556.19 KB 2012-01-13 08:40:13
inner control winder 52.06 KB 2012-01-13 08:40:56
inner control winder2 596.08 KB 2012-01-13 08:52:04
kite tip comms and monitoring 17.55 KB 2012-01-13 08:52:42
mast whip generator perfect 70.33 KB 2012-01-13 08:53:23
mast-and-bow-generator 70.49 KB 2012-01-13 08:54:56
mounted turbine plus belts 473.36 KB 2012-01-13 08:58:02
mounted turbine 5.04 MB 2012-01-13 09:10:36
natural follower 188.27 KB 2012-01-13 09:10:56
natural follower 2.06 MB 2012-01-13 09:12:24
natural follower 2.07 MB 2012-01-13 09:13:39
natural follower2 187.32 KB 2012-01-13 09:13:50
natural follower2 2.09 MB 2012-01-13 09:14:55
natural-follower 157.21 KB 2012-01-13 09:15:10
newest hoop spinner 60.54 KB 2012-01-13 09:15:22
newform torus 24.54 MB 2012-01-13 09:33:30
parameters 17.26 KB 2012-01-13 09:33:31
path3170 161.64 KB 2012-01-13 09:33:39
quarry site 21.98 MB 2012-01-13 09:48:16
quarry site.3dm 26.89 MB 2012-01-13 10:08:41
quary road mountain pass 130.37 KB 2012-01-13 10:08:46
radial track gen 5 KB 2012-01-13 10:08:47
research banner 317.99 KB 2012-01-13 10:08:58
rodskites 6.68 MB 2012-01-13 10:12:07
sea wall 141.06 MB 2012-01-13 12:01:17
seakitering 22.47 MB 2012-01-13 12:09:46
seakitering.3dm 1.49 MB 2012-01-13 12:11:28
seaspinner 131.41 KB 2012-01-13 12:11:33
seed stack 302.65 KB 2012-01-13 12:11:48
seed-spinner-stacked copy 653.98 KB 2012-01-13 12:12:05
seed-spinner-stacked 1.79 MB 2012-01-13 12:12:53
seed-spinner 1.05 MB 2012-01-13 12:13:27
seed-spinner 78.42 KB 2012-01-13 12:13:36
simplified inner control winder 55.63 KB 2012-01-13 12:13:45
Spring return kite piston generator 26.65 KB 2012-01-13 12:13:53
telemetry 12.97 KB 2012-01-13 12:13:59
tensegrity tower with kite wings 763.9 KB 2012-01-13 12:14:34
tensegrity tower with kite wings 34.13 KB 2012-01-13 12:14:47
tether tab 155.29 KB 2012-01-13 12:15:09
tether tab 5.54 KB 2012-01-13 12:15:20
tethered generator 106.68 KB 2012-01-13 12:15:39
Thumbs 120 KB 2012-01-13 12:16:02
torus ring cover cut shape 4.05 MB 2012-01-13 12:19:00
turbine stack 17.71 KB 2012-01-13 12:19:06
untethered generation paths 25.83 KB 2012-01-13 12:19:14
valley gap spinners 631.37 KB 2012-01-13 12:19:44
vertical chamber generator 25.5 KB 2012-01-13 12:19:55
veryical axis inflated gybing spinner 14.35 KB 2012-01-13 12:20:05
wee shore 2.09 MB 2012-01-13 12:21:21
wing 242.98 KB 2012-01-13 12:21:59
wings around hoop 812.29 KB 2012-01-13 12:22:23
how roddys kites work 23.63 MB 2012-01-13 15:03:53
hexamothra
hex arch with centres 65.96 KB 2013-07-27 06:40:42
cutting shape for arch 46.84 KB 2013-07-27 06:40:42
hex arch with centres 43.5 KB 2013-07-27 06:40:44
hex arch with centres 78.54 KB 2013-07-27 06:40:46
hex arch with two lines of controlled kites 1.18 MB 2013-07-27 06:41:50
hex arch with two lines of controlled kites 2.06 MB 2013-07-27 06:41:59
hex arch with two lines of controlled kites 94.4 KB 2013-07-27 06:42:01
hex arch with two lines of controlled kites_autosave 84.75 KB 2013-07-27 06:42:02
Thumbs 20 KB 2013-07-27 06:42:03
mothra models
mothra stack with steering and gills 168.3 MB 2013-01-24 19:50:26
submarine shaft mesh bouyant and sinking pairs 233.49 MB 2013-01-24 20:44:40
upwind mothra ring stacking 44.28 MB 2013-01-24 21:16:48
windswept sea bay 200m with 2 barges 15.22 MB 2013-01-24 21:28:28
windswept sea bay 200m 13.89 MB 2013-01-24 21:38:14
windswept stack 200m 41.32 MB 2013-01-24 22:09:09
submarine shaft 329.26 MB 2013-01-24 23:03:05
2nd kixel in breath 31.24 KB 2013-05-10 07:02:13
1 kixel in breath 68.92 KB 2013-05-10 07:02:17
2nd kixel in breath 108.52 KB 2013-05-10 07:02:18
1 kixel in breath 31.24 KB 2013-05-10 07:02:19
attempting surface hex division 5.96 KB 2013-05-10 07:02:53
mothra 1 fan 353.4 KB 2013-05-10 07:03:01
lifting eye disk wide open 436.28 KB 2013-05-10 07:03:10
lifting eye disk wide open 390.07 KB 2013-05-10 07:03:19
lift eye disk wide open 256.27 KB 2013-05-10 07:03:24
lift disk 240.72 KB 2013-05-10 07:03:29
lifting disk 947 KB 2013-05-10 07:03:51
lifting disk 944.38 KB 2013-05-10 07:04:10
exporting lines to excel 286.8 KB 2013-05-10 07:04:15
computed mothra tether line lengths 9.26 KB 2013-05-10 07:04:19
exporting lines 286.05 KB 2013-05-10 07:04:22
xwindliftingmothra 9.01 KB 2013-05-10 07:04:23
sorting cat endpoint alignment 284.79 KB 2013-05-10 07:04:29
lifter setup crosswind lift line 902.87 KB 2013-05-10 07:04:51
lifter setup crosswind dropped tether averaging 355.33 KB 2013-05-10 07:04:55
lifter setup crosswind droped tether averaging 284.71 KB 2013-05-10 07:05:04
lifter setup crosswind dropped tether averaging 386.39 KB 2013-05-10 07:05:10
flipwing mothra live reframing catenary division 222.78 KB 2013-05-10 07:05:16
lifter setup crosswind lift line 299.92 KB 2013-05-10 07:05:21
mothra cone 429.14 KB 2013-05-10 07:05:32
lifter setup crosswind lift line 957.32 KB 2013-05-10 07:05:52
lifter setup 655.26 KB 2013-05-10 07:06:05
lifter setup 299.96 KB 2013-05-10 07:06:11
lifter setup 702.1 KB 2013-05-10 07:06:28
flipwing mothra billowing 238.72 KB 2013-05-10 07:06:31
flipwing mothra live 44.1 KB 2013-05-10 07:06:33
flipwing mothra live 43.72 KB 2013-05-10 07:06:34
flipwing mothra live 239.27 KB 2013-05-10 07:06:41
daves kite ag 3.5 MB 2013-05-10 07:09:34
daves kite ag 4.92 MB 2013-05-10 07:09:43
mothra hosting flipwings 239.23 KB 2013-05-10 07:09:59
in place holm flipwing moving mothra 2.08 MB 2013-05-10 07:10:34
mothra hosting flipwings 76.9 KB 2013-05-10 07:10:37
mothra hosting daisy2 236.14 KB 2013-05-10 07:10:42
mothra hosting daisy2 2.09 MB 2013-05-10 07:11:29
mothra hosting daisy 236.15 KB 2013-05-10 07:11:34
mothra hosting daisy 6.29 MB 2013-05-10 07:13:53
mothra ready for geny 229.68 KB 2013-05-10 07:13:58
culled square patches mothra awaiting genys 218.44 KB 2013-05-10 07:14:03
culled square patches mothra awaiting body and gens 210.36 KB 2013-05-10 07:14:08
spinning patchable arches 81.79 KB 2013-05-10 07:14:11
square meshing mothra awaiting body and gens 201.96 KB 2013-05-10 07:14:16
spinning patchable arches 81.46 KB 2013-05-10 07:14:18
using front based catenry division mothra awaiting body and gens 198.11 KB 2013-05-10 07:14:23
mothra awaiting body and gens 190.05 KB 2013-05-10 07:14:28
constant sheet lengths spinning 196.4 KB 2013-05-10 07:14:33
constant sheet lengths 187.58 KB 2013-05-10 07:14:37
smoother footed needs constant sheet sizes 156.32 KB 2013-05-10 07:14:41
foot lines in time for foot offsetting remake and stacking 173.97 KB 2013-05-10 07:14:46
22 controlls mapped to catenarys 169.77 KB 2013-05-10 07:14:50
19 controlls mapped to catenarys 166.74 KB 2013-05-10 07:14:54
lpd8 controls 30.83 MB 2013-05-10 07:26:09
16 controlls mapped to catenarys 160.87 KB 2013-05-10 07:26:14
controlled and related catenarys with slider reset 156.78 KB 2013-05-10 07:26:18
controlled and related catenarys 147.94 KB 2013-05-10 07:26:21
lpd8 puredata udp knob mapper 5.84 KB 2013-05-10 07:26:22
LPD8MidiControls 46.7 KB 2013-05-10 07:26:24
spinning loft between two catenarys 121.4 KB 2013-05-10 07:26:27
spinning with bridling 121.43 KB 2013-05-10 07:26:30
pree boolean 120.36 KB 2013-05-10 07:26:34
spinning patchable arches working front bridling 2 points back mesh divi 110.93 KB 2013-05-10 07:26:37
spinning patchable arches working front bridling 2 points 95.95 KB 2013-05-10 07:26:39
spinning patchable arches working front bridling 93.35 KB 2013-05-10 07:26:42
baked patchable arches 85.74 KB 2013-05-10 07:26:45
spinning patchable arches working bridling (2) 91.53 KB 2013-05-10 07:26:47
spinning patchable arches working bridling 91.53 KB 2013-05-10 07:26:50
spinning patchable arches working old way 80.46 KB 2013-05-10 07:26:52
Percentageofcurves 4.82 KB 2013-05-10 07:26:53
spinning patchable arches messing back old way 73.42 KB 2013-05-10 07:26:55
spinning patchable arches 71.74 KB 2013-05-10 07:26:58
in place holm movable frame arches lifting feet arghhhhh 28-1 64.57 KB 2013-05-10 07:27:00
in place holm pairs twos of sheets 742.11 KB 2013-05-10 07:27:16
mothra hosting flipwings 68.07 KB 2013-05-10 07:54:47
cone mesh rear wall.3dm 41 bytes 2013-05-17 08:01:53
Thumbs 36 KB 2013-05-17 08:02:03
cone mesh rear wall 23.85 KB 2013-05-17 08:02:04
mothra 1 fan 346.99 KB 2013-05-17 08:02:14
steering line mothra 290.11 KB 2013-05-17 08:02:21
3rd kixel in breath 30.06 KB 2013-05-17 08:02:41
steering line mothtra 906.9 KB 2013-05-17 08:02:41
3rd kixel in breath 58.7 KB 2013-05-17 08:02:48
3rd kixel in breath 53.25 KB 2013-05-17 08:02:49
line riders 18.37 KB 2013-07-27 03:56:47
single pull power unit 1.12 MB 2013-07-27 03:57:21
line riders 40.31 MB 2013-07-27 04:27:07
line riders 39.79 MB 2013-07-27 04:27:51
flip jib power plus control addition 3.84 MB 2013-07-27 04:29:52
mothra with flipwing gill sails 249.5 KB 2013-07-27 04:30:01
mothra with flipwing jib sails 247.95 KB 2013-07-27 04:30:13
flip jib power plus control addition 2.98 MB 2013-07-27 04:30:16
mothra with flipwing gill sails 55.14 KB 2013-07-27 04:30:27
mothra with flipwing jib sails 438.82 KB 2013-07-27 04:30:27
mothra with flipwing gill sails 50.43 KB 2013-07-27 04:30:30
cone mesh rear wall_autosave 311.38 KB 2013-07-27 04:30:36
cone mesh rear wall 49.92 KB 2013-07-27 04:31:17
cone mesh rear wall 330.46 KB 2013-07-27 04:31:19
propper backline steering 53.34 KB 2013-08-30 05:42:08
propper backline steering 378.17 KB 2013-08-30 05:42:10
anchor field supports belay circle 506.69 KB 2013-09-28 04:54:58
anchor field supports belay circle3 29.44 KB 2013-09-28 04:54:58
flipwing jibs webunderwing 234.08 KB 2013-09-28 04:55:28
flipwing jibs webunderwing 7.65 MB 2013-09-28 04:55:43
driving the ground round4 185.61 KB 2013-09-30 08:45:56
driving round on a rail set 2.49 MB 2013-09-30 08:46:48
ribbed and lifting the midlines 2.68 MB 2013-10-28 07:31:45
large sheets fuselage swing 262.49 KB 2013-10-28 07:31:45
large sheets 287.65 KB 2013-10-28 07:31:48
ribbed and lifting the midlines2 273.56 KB 2013-10-28 07:31:49
ribbed and lifting the midlines 277.21 KB 2013-10-28 07:31:52
lifting the midlines 233.34 KB 2013-10-28 07:31:53
lifting the midlines 2.72 MB 2013-10-28 07:32:01
whole lift trampoline 192.36 KB 2013-10-28 07:32:05
whole lift trampoline 2.72 MB 2013-10-28 07:32:15
raising side swinger 2.68 MB 2013-10-28 07:32:25
raising side swinger 200.73 KB 2013-10-28 07:32:29
fin driving side sweeper 195.04 KB 2013-10-28 07:32:33
fin driving side sweeper 2.68 MB 2013-10-28 07:32:42
driving around on a rail set3 carriage 198.28 KB 2013-10-28 07:32:48
mothra 1 fan 271.74 KB 2013-10-28 07:32:58
driving round on a rail set3 carriage 2.91 MB 2013-10-28 07:32:58
mothra 1.13 MB 2013-10-28 07:33:06
mothra 1.59 MB 2013-10-28 07:33:06
driving around on a rail set2 181.72 KB 2013-10-28 07:33:09
driving round on a rail set2 3.03 MB 2013-10-28 07:33:16
anchor field supports belay circle4 41.73 KB 2013-10-28 07:33:20
anchor field supports belay circle3 263.53 KB 2013-10-28 07:33:23
Mothra on a rail 1.39 MB 2013-10-28 07:33:30
Mothra on a rail 2.24 MB 2013-10-28 07:33:38
anchor field supports belay circle4 2.79 MB 2013-10-28 07:33:53
seagull heart
seagull heart 670.19 KB 2013-09-28 04:54:18
seagull heart 669.63 KB 2013-09-28 04:54:18
Thumbs 5 KB 2013-09-28 04:54:21
seagull heart 104.92 KB 2013-09-28 04:54:25
shrimp triad arch
Ottawa Sikorsky lifted 636.94 KB 2013-07-27 06:42:31
shell for population 1.19 KB 2013-07-27 06:42:42
Ottawa Sikorsky lifted 649.26 KB 2013-07-27 06:42:42
shell for population 252.77 KB 2013-07-27 06:42:42
tail splitting steering 385.64 KB 2013-07-27 06:42:51
tail splitting steering 65.07 KB 2013-07-27 06:42:54
Thumbs 24 KB 2013-07-27 06:42:57
tail splitting steering 247.29 KB 2013-07-27 06:42:58
triad arch flat tops 22 KB 2013-07-27 06:42:59
triad arch going for shrimp body to do surface dragging 26.26 KB 2013-07-27 06:43:00
triad arch going for shrimp body to do surface dragging_autosave 27.46 KB 2013-07-27 06:43:01
triad arch going for shrimp tail dragger meshing 11.31 MB 2013-07-27 06:51:46
triad arch going for split tails vertical 33.9 KB 2013-07-27 06:51:48
triad arch inverse camber 25.52 KB 2013-07-27 06:51:50
triad arch 282.73 KB 2013-07-27 06:52:06
triad arch going for shrimp tail dragger meshing 13.04 MB 2013-07-27 06:52:07
triad arch 16.07 KB 2013-07-27 06:52:09
triad arch 28.79 KB 2013-07-27 06:52:09
closing shrimps tail 26.99 KB 2014-01-17 09:38:21
closing shrimps tail 71.52 KB 2014-01-17 09:38:22
even pulley bridling loose 21.22 KB 2014-01-17 09:38:25
even pulley bridling loose 32.37 KB 2014-01-17 09:38:26
ladder lift 311.13 KB 2014-01-17 09:38:29
even pulley bridling 0 bytes 2014-01-17 09:38:29
even pulley bridling 30.07 KB 2014-01-17 09:38:33
tear duct
tear duct 24.97 KB 2013-07-27 06:42:05
Thumbs 3.5 KB 2013-07-27 06:42:06
tear duct 26.18 KB 2013-07-27 06:42:08
tidal
sea gap 6.4 MB 2013-06-21 15:53:01
sea gap 74.59 KB 2013-06-21 15:53:05
surface mesh 71.4 KB 2013-06-21 15:53:10
Thumbs 14 KB 2013-06-21 15:53:12
tide drogue 1 478.81 KB 2013-06-21 15:53:31
tide drogue 1 496.33 KB 2013-06-21 15:53:51
tide drogue 1 32.06 KB 2013-06-21 15:53:54
sea gap 3.96 MB 2013-06-21 15:55:31
unfurlers
can ga roo 14.57 KB 2013-10-28 07:29:07
Recovered model - RhinoAutosave 128.13 KB 2013-10-28 07:29:10
roller mount1 161.75 KB 2013-10-28 07:29:14
roller mount1 43.86 KB 2013-10-28 07:29:18
roller mount1 12.08 MB 2013-10-28 07:29:44
roller mount2 can garoo 12.1 MB 2013-10-28 07:29:54
Thumbs 16.5 KB 2013-10-28 07:29:57
roller mount2 can garoo 12.08 MB 2013-10-28 07:31:24
venous pipe
Thumbs 13.5 KB 2013-06-21 15:54:00
venous kite dynamo pipe 3.55 MB 2013-06-21 15:55:48
venous kite dynamo pipe 52.07 KB 2013-06-21 15:55:56
venous kite dynamo pipe 809.22 KB 2013-06-21 15:56:00
venous kite pipe 37.11 KB 2013-06-21 15:56:14
venous pipe 1 with para veins 36.58 KB 2013-06-21 15:56:24
venous pipe 1 457.03 KB 2013-06-21 15:56:48
venous pipe 1 417.16 KB 2013-06-21 15:57:08
venous pipe 1 40 KB 2013-06-21 15:57:14
venous kite pipe 141.82 MB 2013-06-21 16:48:13
vids
sea multi stack 148.59 KB 2012-01-13 12:47:59
Thumbs 38 KB 2012-01-13 12:48:04
Untitled-1 copy 88.23 KB 2012-01-13 12:48:12
Untitled-1 copy2 85.82 KB 2012-01-13 12:48:21
Untitled-1 copy3 88.3 KB 2012-01-13 12:48:31
Untitled-1 copy4 94.81 KB 2012-01-13 12:48:42
Untitled-1 copy5 122.09 KB 2012-01-13 12:49:00
Untitled-1 copy6 90.98 KB 2012-01-13 12:49:05
Untitled-1 copy7 82.34 KB 2012-01-13 12:49:11
Untitled-1 copy8 131.42 KB 2012-01-13 12:49:19
Untitled-1 79.87 KB 2012-01-13 12:49:26
weepics
all in one kite and hydrogen deep sea copy 40.16 KB 2012-01-13 12:49:46
all in one kite and hydrogen deep sea 40.16 KB 2012-01-13 12:49:54
combined wind hydrogen and gravity generator copy 49.02 KB 2012-01-13 12:50:04
Comparisons copy 34.25 KB 2012-01-13 12:50:12
d-ring bag squash mount copy 40.05 KB 2012-01-13 12:50:22
disk-driverl copy 37.41 KB 2012-01-13 12:50:31
duelling kites pump copy 43.91 KB 2012-01-13 12:50:39
free-n-fix-pump copy 25.69 KB 2012-01-13 12:50:41
freeandfixed1 copy 20.74 KB 2012-01-13 12:50:42
freeandfixed2 copy 21.32 KB 2012-01-13 12:50:44
freeandfixed3 copy 21.99 KB 2012-01-13 12:50:46
freeandfixed4 copy 22.22 KB 2012-01-13 12:50:49
freeandfixed5 copy 27.72 KB 2012-01-13 12:50:53
generator chamber copy 53.3 KB 2012-01-13 12:50:58
hoop line twister copy 34.1 KB 2012-01-13 12:51:03
kite tip comms and monitoring copy 37.2 KB 2012-01-13 12:51:09
mast-and-bow-generator copy 35.85 KB 2012-01-13 12:51:13
mast-and-bow-generator2 copy 35.62 KB 2012-01-13 12:51:15
parameters copy 32.81 KB 2012-01-13 12:51:17
research banner copy 98.16 KB 2012-01-13 12:51:22
spring return generator copy 35.39 KB 2012-01-13 12:51:26
telemetry copy 31.07 KB 2012-01-13 12:51:30
tethered generator copy 48.52 KB 2012-01-13 12:51:36
Thumbs 85 KB 2012-01-13 12:51:44
untethered generation paths copy 38.07 KB 2012-01-13 12:51:51
vertical chamber generator copy 33.38 KB 2012-01-13 12:51:57
Tidepipe4 570.54 KB 2014-02-24 08:46:25
Tidepipe4 27.66 KB 2014-02-24 08:46:28
closing shrimps tail 25.59 KB 2014-03-14 08:29:00
even pulley bridling 22.09 KB 2014-03-14 08:29:04
closing shrimps tail 51.11 KB 2014-03-14 08:29:08
mountain gap with tornado 15.28 MB 2014-03-14 08:29:10
even pulley bridling loose 32.37 KB 2014-03-14 08:29:12
tornado flute to twister attempt 3 113.25 KB 2014-03-14 08:29:59
tornado flute to twister attempt 3 30.08 KB 2014-03-14 08:30:00
twin lift side by side flapper twist and stretch 50.82 KB 2014-03-14 08:30:24
twin lift side by side flapper twist and stretch 58.59 KB 2014-03-14 08:30:25
wobble stack plus gubbins 221.22 KB 2014-03-14 08:30:45
wobble stack plus gubbins 18.92 MB 2014-03-14 08:31:32
cone panels 45.55 KB 2014-07-27 11:03:45
baked tornado 6.82 MB 2014-07-27 11:04:12
publicly available kite power designs files

 

All files and designs on kitepowercoop are available under the following license.


This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.


Kitepowercoop by Roderick Read is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 Unported License.

Should you wish to use the designs commercially please contact Roderick Read. Community cooperatives... We are fine with that. If you're doing this for share holder profiteering, please, please consider the rest of the world. Those less fortunate, unable to buy your shares... Donate your designs freely. Share the benefit of your wealth... A bit of consideration please, this is useful hardware.

Coop Members Login Form

One time donation

Please consider a donation, Kite Power Coop is not yet sponsored. Our work is early stage and already flies in the face of protectionist practices. The success of our designs improves equality in power generation globally. Our accounts are fully open, all membership is voluntary. Maybe even just a small donation?

Regular Hero

Sponsorship Options